Finger Pulse Oximeter Pulse Oximeter Oximeter EKG Oximeter Pulse Monitor Heart Rate Monitor Heartbeat Oxygen Saturation Sp02 OM1
Your position: Home / NEW ARRIVAL
  • Description
    Technical Specifications                                           
    1. Display Format: LCD Display; SpO2 Measuring Range: 0% ~ 100%; Pulse Rate Measuring Range: 30 bpm ~ 250 bpm; Pulse Wave Display: columniation display and the waveform display.

    2.Power Requirements: 2×1.5 V AAA alkaline battery (or using the rechargeable battery instead),adaptable range: 2.6 V - 3.6 V.
    3.Power Consumption: Smaller than 30 mA. 
    4.Resolution: 1% for SpO2 and 1 bpm for Pulse Rate. 
    5.Measurement Accuracy: ±2% in stage of 70% ~ 100% SpO2, and meaningless when stage being smaller than 70%. ±2 bpm during the pulse rate range of 30 bpm ~ 99 bpm and ±2% during the pulse rate range of 100 bpm ~ 250 bpm . 
    6.Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ± 2 bpm during the pulse rate range of 30 bpm ~ 99 bpm and ±2% during the pulse rate range of 100 bpm ~ 250 bpm . 
    7.Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%. 
    8. It is equipped with a function switch: The product will enter standby mode when no signal is in the product within 5 seconds. 
    9.Optical Sensor Red light (wavelength is 660 nm, 6.65 mW) Infrared (wavelength is 880 nm, 6.75 mW)

    Features                                                                      

    1.Easy to use: Just insert your finger  into the rubber hole to be measured. Accurate SpO2 and pulse values ​​are displayed on the LCD in seconds.
    2. Accurate data: In clinical experiments it was shown that the finger pulse has a high accuracy and reproducibility. SpO2 has an accuracy of +/- 2% and the pulse has an accuracy of +/- 2 beats per minute.
    3.Compact and portable: Small and light, you can take it anywhere, anytime.
    4.Low power consumption: To save energy, it switches off automatically after 8 seconds if there is no finger in the product. Power supply via 2 AAA batteries (batteries not included).
    5.Wide applicability - The pulse oximeter is not only suitable for children, but also for adults. Whether you're an athlete or a person with respiratory or vascular disease, you deserve to have our pulse oximeter on your finger.

    Installation                                                                  

    Operating Guide                                                         
    1.Insert the two batteries properly to the direction, and then replace the cover. 
    2.Open the clip as shown in Figure 5.
    Figure 5 Put finger in position
    3.Let the patient’s finger put into the rubber cushions of the clip (make sure the
    finger is in the right position., and then clip the finger. 
    4.Press the button once on front panel. 
    5.Do not shake the finger and keep the patient at ease during the process. Meanwhile, human body is not recommended in movement status.
    6.Get the information directly from screen display. 
    7.The button has two functions.When the device is in standby mode, pressing the button can exit it; When the device is in operation status, pressing the button long
    can change brightness of the screen. 
    8.The device could change display direction according to the handing direction.

    Accessories
                                                                  
    One hanging rope;
    Two batteries(optional)
    One User Manual.


    Attentions                                                                   
    1.The uncomfortable or painful feeling may appear if using the device ceaselessly, especially for the microcirculation barrier patients. It is recommended that the sensor should not be applied to the same finger for over 2 hours. 
    2.For the individual patients, there should be a more prudent inspecting in
    the placing process. The device can not be clipped on the edema and tender
    tissue.
    3.The light (the infrared is invisible) emitted from the device is harmful to the eyes, so the user and the maintenance man, can not stare at the light. 
    4.Testee can not use enamel or other makeup. 
    5.Testee’s fingernail can not be too long. 
    6.Please peruse the relative content about the clinical restrictions and caution. 
    7.This device is not intended for treatment. 

    More Details                                                               





    Certificate                                                                    



     

Finger Pulse Oximeter Pulse Oximeter Oximeter EKG Oximeter Pulse Monitor Heart Rate Monitor Heartbeat Oxygen Saturation Sp02 OM1

The Fingertip Pulse Oximeter is a non-invasive device intended for the spot-check of oxygen
saturation of arterial hemoglobin (SpO2) and the pulse rate
$50.99
27% OFF
    Please select the information you wantX
+
-
(10 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from